Scissor belt is In patients with in particular, a good solution

• in the pharmaceutical and chemical industries:

Precautions clean and Liquid operation, long service life devices – all of this is very important in the pharmaceuticals and chemistry industry. The belt lift table is the best alternative to hydraulic lift table in places where the production plant cannot afford hydraulic solutions, whether due to the dust deposited on the hall or the existing risk of oil spill.

• in the food industry:

The belt lift table shall ensure that no leakage is possible at the time of failure. In the food sector where hygiene and safety standards are tightened, a belt lift table is an excellent solution. Checks as integral part of the production line. . . For all this, it allows for clean repairs, and mandatory machine inspections take place every 6 months.

• industry Automotive:  

We know how much it costs to stop every minute on the production line in the Automotive industry. Belt lift table allows you to fast work. . . In addition, minimal emergency the lift table makes it very rarely necessary to stop production. In case of any problems, The fault can be removed in approx. 10 – 15 minutes. . . What’s more, no trained personnel are needed. . . With a pulley we save a lot of time and even more money!

• in production aircraft construction:

Security is the most important thing in this industry!

Fast crash location, safety factor >=10, large lifting loads and heights, performance power and robustness devices are the most desirable features in this industry. Let’s add to that. full steel profiles and no manufacturer will pass alongside this solution in any way.

Everything you need to know about belt-driven scissor lift tables:

Depending on the project, it is possible lifting height up to 6000 mm and speeds up to 600 mm/s. At construction heights of 200 mm above can be obtained lifting capacity from 500 to even 12,000 kg.

How does it work?

• Smooth lifting and lowering immediately after pressing the button – no moment of hesitation,
• lack of control electronics – simple and easy to use,
• no oil, 
• the possibility of working a lift table even with a broken belt,
• no hydraulic hoses and valves makes the location of the crash take little time,
• simple transmission of shaft or belt drive
• simple replacement engine in 15 minutes – without any training.

Flat applied polyamide belts are made of steel ropes in polyurethane casing and are designed to carry specific loads. Each belt shall be monitored individually by checking the clearance, and in lift tables with more than two straps, in case of breaking of the belt, it is possible to terminate the work cycle by emergency.

The manufacturer of belt ropes is known for the robustness of Brugglifting, which is a producer of elevator ropes. (Their examples: Burj Chalifa, Rolex, Keppel Bay)

Bearings between the scissors consist of a hard chromed bolt and a steel sleeve with a composite coating. The fixed side bearings are built in the form of maintenance-free Y-type bearings. The dismantling of bearings is really simple.

Both rollsas well as road rails They give in to easy and quick exchange. The rollers in the rails are equipped with maintenance-free ball bearings. They are constructed of 42CrMo4 steel, which guarantees their long life.

The rails are made of abrasion-resistant steel.

The shaft the rewinder is arranged with two bearing assemblies.

Different platform dimensions, additional options – on request.

If you are interested in receiving the offer, please feel free to contact us!

————————————————————————————————–

Quick contact:

+48 65 513 12 92
sekretariat@ps-lift.com