Increase the capacity of up to 60 tons!

Robust, proven, safe, with a robust engine and housing, equipped with a precise gearbox, silently working and easy to use – these are only some strong points of Hadef chain hoists.

The new electrical and pneumatic chain hoists hadef join the portfolio of already available hand chain hoists of this manufacturer.

Expanding the offer allows you to offer cranes with loads of more than 6,300 kilograms. The cranes we manufacture are already available in configurations that allow to work with loads of up to 10 tons.  

Electrical chain hoist with a load capacity of 6,3 – 60 tonnes

The hoists can be suspended on both the crane and the crane. They are used in all industries, where the problem of lifting, lowering and transporting very heavy loads needs to be solved.

Special solutions are available for demanding or restrictive working environments. The proposed lifting units shall each time be adapted to the conditions prevailing in the specific plant. Given each sector, models are available to low and ultra low housing, implementation offshore, versions ATEX for potentially explosive zones, and with loads of up to 60 tons!

Equipment

Hadef electric hoists can be hung on the eye, hook or electric carriage. Built-in sliding clutch prevents the hoist from overloading, and safe handling of the tempered steel chain prevents it from turning. Each string is galvanized, and therefore wear-resistant. The hoist is equipped with a chain container, and its size is adjusted to the length of the chain.

Additional options

• a housing to protect against atmospheric conditions,
• aluminium/plastic housing,
• radio control,
• low voltage 48V,
• different speed of the trolley,
• weight for load measurement,
• thicker layers of the tractor shell.

Pneumatic chain hoist

Application

What distinguishes the pneumatic chain hoists is above all the fact that they don’t need they for the operation of electricity.

Therefore, will be the best solution in places where there is no access to electricity, in areas at risk of explosion and wherever additional restrictions are imposed.

It should be noted that heavy industry is not the only one using this type of solution. Because wherever there is dust, there is a risk of spark ignition, industries such as cosmetics, pharmaceuticals, food, alcohol or, for example, chemical are also used in pneumatic hoists.

For ATEX models, both the pneumatic chain hoist and the pneumatic carriage are equipped with a stainless steel carrier chain, bronze hooks and non-sparkling parts.

Hadef air chain hoists are lightweight and compact But it doesn’t affect the impressive lift. These lifting units can lift up to 30 tons of cargo. And thanks to unfailing drives, they do not require frequent services.

Equipment

The suspension of the hoist is possible on hand, electric and pneumatic carriages, on the eye or hook. The length of the galvanized chain is adjusted individually and each hoist is equipped with a container for the same chain.

Built-in sliding clutch prevents the hoist from overloading. In the event of an air outlet being cut off, special protection shall be protected from the fall of the load.

Air hoists They’re working at 6 bar pressure.. . . Possible high lifting speeds and the housing of the hoist in aluminium.

Hadef also manufactures hand chain hoists. The offer includes 4 custom models.

Hand-held chain hoist – big lifting capacity

Hadef hand hoist models are characterized by compact, compact and steel housing. Depending on the application, it raises loads with a load capacity of between 5,000 kg and up to 50,000 kg. It is worth noting that, the hoist HADEF 5t (with a load capacity of 5,000 kg) has a single multiple of the chain. This is rare in the crane market.

Thanks to the falls and overload protection (slip clutch), the lifting unit has a high safety factor. The hand hoist is equipped with Rotary bearing hook with ball bearing, which eliminates chain twisting when lifting or lowering the charge.

Both carrier and maneuver chains are zinc plated.

In the equipment options are available chains with stainless steel, hooks galvanized or brown, possible implementation in ATEX version , custom string lengths.

Aluminium hand chain hoist

HADEF aluminium manual chain hoist is great an alternative to the hoist hand chain made of steel. . . Thanks to the use of this raw material, the hoist is even 45% lighter from standard steel units.

Reinforced upper and lower hooks with protections are resistant to overload.

Like any hand-held chain hoist, this one is also ideal for lifting, pulling and stressing heavy or bulky loads.

Despite the low own mass, load capacity of this device up to 5,000 kg.

Also available is an aluminum hand chain lever hoist, which is also up to 45% lighter than steel proposals.

The use of this type of lever hoist allows lifting, pulling, stressing and drag heavy, bulky loads to 3 000 kg.

Hand-held chain hoist for low build

Thanks to its low build, the chain hoist manual HADEF is anda custom solution in rooms where it is important maximum surface use. Compact construction equipment also increases the scope of the hook.

The hoists have load capacity from 1,000 kg to as much as 30,000 kg!

Integrated carriage manual is another advantage of this device. In addition, we can apply bogie locking on the beam, buffers, galvanised version or dedicated version of ATEX zone.

To all the hoists provide spare parts and we perform their service and reviews. . . In case of need to submit the device to the Technical Supervision Office, please contact the service department.