---

Loading scissor lift tables

• lifting capacity from 2000 kg up to 10000 kg
• for handling all types of vans, ramps, etc.
• Single Scissor System
• lifting with 2 hydraulic actuators
• possibility of installation directly on the floor or in the foundation
• Security frame
• Valve protecting the lift table against uncontrolled lowering
• manual control box with safety switch for outdoor use, optionally with key or e.g. in the control box
• platform made of corrugated sheet
• possibility of working indoors and outdoors
• an inspection hatch is recommended
• In addition, the device can be equipped with handling flaps
• top end switch for precise adjustment of the maximum lifting height
• optionally – reinforced structure allowing to pass through the platform in a complex state of vehicles with a pressure of 2 or 10 tonnes per wheel depending on the model
• the possibility of securing the work zone in the form of e.g. steel grid around scissors, railings, opening gates
• in option – the unit is up to 8 meters away from the lift tables, with the possibility of placing it in a nearby building
• optional: Increase the protection class of the power unit from IP 54 to IP 65
• applications of a number of additional accessories depending on the needs of the Client
• possible implementation of the ATEX version for potentially explosive zones

Examples of accessories:

Limit switch – stops the lift table at the required height, adjustable.
Transhipment flaps – they’re used to fill the gap between the lift table platform and the vehicle. They can be operated manually or hydraulically. This option is mainly used for handling scissor lift tables.
Overload protection – helps stabilize the scissor lift table. Minimises the risk of tilting the lift table. It is recommended when increasing the platform above 10%.
Reinforced platform – provides additional support for the scissor lift table. It also contains mechanical buffers in the lower frame.
High load absorbing performance – equipped with additional functions for scissors for intensive use.
External power unit in a steel housing – provides additional protection in vulnerable environments. It also provides protection if there is a risk of falling objects and hitting the drive system.
Protective town – steel grid – Scissors can be shielded with a steel mesh curtain to reduce the risk of injury. The protective musket provides excellent protection against mechanical damage to the scissors. The use of dwellings requires an expansion of the platform by +150 mm.
Inspection hatch – provides access to the unit inside the lift table when folded.

EDMOLIFT – Swedish manufacturer of scissor lift tables

Model	Load capacity [kg]	Stroke [mm]	Lowered height [mm]	Platform length [mm]	Platform width [mm]
TTV 2000	2000	1300	305	2000	1500
TTV 2000B	2000	1300	305	2000	2000
TTV 2000L	2000	1600	305	2500	1500
TTV 2000LB	2000	1600	305	2500	2000
TTV 2000XL	2000	1600	305	3000	2000
TTV 2000XLXB	2000	1600	305	3000	2400
TTV 4000	4000	1300	305	2000	1500
TTV 4000B	4000	1300	305	2000	2000
TTV 4000L	4000	1600	405	2500	1500
TTV 4000LB	4000	1600	405	2500	2000
TTV 4000XLB	4000	1600	405	3000	2000
TTV 4000XLXB	4000	1600	405	3000	2400
TTV 6000	6000	1300	450	2200	1500
TTV 6000B	6000	1300	450	2200	2000
TTV 6000L	6000	1600	450	2500	1500
TTV 6000LB	6000	1600	450	2500	2000
TTV 6000LXB	6000	1600	450	2500	2400
TTV 6000XLB	6000	1600	450	3000	2000
TTV 6000XLXB	6000	1600	450	3000	2400
TTV 8000	8000	1600	600	3000	2000
TTV 8000B	8000	1600	600	3000	2400
TTV 10000	10000	1600	600	3000	2000
TTV 10000B	10000	1600	600	3000	2400

GRUSE – German Scissor Lifter Manufacturer

Model	Remarks
ELS — Positions	after adequate retrofitting can be used as a lift table Scissor handling
ELT — Two-scissor (level)	after adequate retrofitting can be used as a lift table Scissor handling
ELD — bi- and three-scissor (vertical)	after adequate retrofitting can be used as a lift table Scissor handling

Other platform dimensions and additional options available on request

You want to know more? Check out ours projects.