Top-running overhead cranes
They undoubtedly work wherever there is a need to manipulate heavy or bulky loads.
First of all, it’s this the most commonly used solution for internal transport in all types of production halls and warehouses.
Importantly, when selecting a suitable crane, account should be taken of the number of work cycles during a given period and whether your company works in single or multi-change mode.
To fulfill your expectations, you must choose an appropriate lifting device.
Devices that you can hang on the overhead crane:
The most frequently suspended lifting unit are electrical chain hoists:
– for lifting capacity up to 6300 kg take advantage of a wide range of GIS hoistsWe are an authorized representative in Poland – VIEW
– for lifting capacity exceeding 6 300 kg to 10 tonnes are available Hadef hoists – VIEW
The use of a overhead crane in your company will certainly enable ergonomic transfer of loads over the entire length of the hall. . . In an intuitive way, you will pick up and place in the desired place materials that must have been transported by forklift, hand trolley, workshop crane or the strength of human muscles.
First of all, the above cranes are used in production plants, warehouses, handling warehouses. . . The advantages of track cranes are practically the entire industrial sector: from the automotive industry, through food and furniture, to wood and stone.
All cranes shall be supervised by the Technical Supervision Authority..
However, not all of us have to report to the Office. It is not mandatory to report cranes with a load capacity of up to 250 kg, whether equipped with a manual or electric hoist. The power supply voltage of the hoist is also irrelevant: 1 phase or 3 phase.
A few technical information
To the bridge beam, the cranes are welded with headsets, which, thanks to their equipment, allow the crane bridge to move on the track.
Moreover, even several crane bridges can be moved on one track.
Depending on the technical conditions in the hall and their preferences, customers can purchase the crane bridge on its own, the bridge with a runway, or the bridge with a runway and supporting structure.
The bridge and track can be fitted to the construction of an existing hall or supporting structure, made by PS LIFT. The steel structure can be mounted on the floor of the hall and attached to it by means of anchors. If the floor does not meet the strength requirements, the foundations for support pillars should be made. After the foundation has been constructed, the device is mounted on flooded pins.
Depending on the customer’s needs, beam movement in the track can be both manual and electric. The same applies to driving a carriage on the crane bridge where the hoist will be suspended. We also choose the hoist by hand or electric.
Control shall be carried out by means of a control tape or radio system.
What should you know about PS Lift overhead cranes?
- OWN PRODUCTION OF PS LIFT
- NAVET TO 10,000 KG
- ASSISTANCE OF AMOUNT TO 15 METERS
- CAPACITY OF THE SELF-POSSIBILITY, MOST-POSSIBILITY WITH TOROVIAN OR MOST-POSSIBILITIES AND STANDING CONSTRUCTION
- TRAINING OF A SUCCESS IN THE HAND OR ELECTRONIC TOROW
- TRAINING IN THE BELLE OF HAND OR ELECTRIC SURVEY
- FOR THE SELECTION OF A HAND OR ELECTRIC INDICATOR
- TRAINERS AND ELECTRICAL CARDS OF ONE OF THE BEST PRODUCERS IN THE WORLD – SWITZERLAND FIRMS GIS AG
- FULL SUPPORT OF OUR SPECIALISTS FROM MEASUREMENTS TO DUTIES
We offer track craneswhich are covered by a warranty and post-guarantee service.
When purchasing devices at PS Lift we provide installation and technical inspections.
We provide assistance in preparing the technical documentation needed to register the device in UDT.
Do you want to know more about the registration of crane equipment in the Technical Inspection Office?
Do you have any questions? Check out ours projects or contact us and we will resolve your doubts.
Top-running overhead cranes
