Steel underslung overhead cranes
The use of suspended cranes with a steel bridge beam shall be particularly suitable when the hall is a low room. When there is no room for standard track under the overhead cranes, they are an excellent alternative.
In the case of suspended cranes, the bridge is hung to the lower part of the tracks and the dead zones (where the hook of the hoist does not reach) are reduced to a minimum.
This type of crane can be mounted to the existing building of the hall or purchased in PS Lift with supporting structure, anchored to the floor.
Are you looking for a good, often clever, and thoughtful solution in your business? You’re in the right place!
Devices that you can hang under suspended cranes:
The most frequently suspended lifting unit are electrical chain hoists:
– for lifting capacity up to 6300 kg take advantage of a wide range of GIS hoistsWe are an authorized representative in Poland – VIEW
– for lifting capacity exceeding 6 300 kg to 10 tonnes are available Hadef hoists – VIEW
What else do you need to know?
- NAVET TO 10 TONS
- DISCLOSURE BY CLIENT PREFERENCE
- FOR THE SELECTION OF HAND OR ELECTRONIC BELICES — MOST FREQUENTLY USED ELECTRONIC
- FOR THE SELECTION OF PORTUGAL OR ELECTRIC BELGE
In PS Lift, we will take care of your performance from A to Z. With us you will receive support every step of the way!
Are you determined? Or maybe not?
Why don’t you set up a meeting with us, and we’ll come to the place, do detailed measurements and advise on the best solution.
Moreover, our services do not end in the manufacture and sale of crane equipment. We offer installation of cranes, warranty and post-guarantee service and periodic inspection of equipment
UDT
Specially for you, we will prepare the technical documentation needed to register the device in the Technical Inspection Office.
REMEMBER THE ARTICLE AND FIND OUT WHAT WE’RE DOING IN THE PS Lift WE CAN DO FOR YOU: READ MORE
You want to know more? Check out ours projects.
Underslung overhead cranes
